http://www.xgaming.com/support en-us http://www.xgaming.com/support ActiveKB NX support@xgaming.com Thu, 23 May 2013 05:58:59 EDT 20 http://www.xgaming.com/support/questions/53/ Go to the "Mouse" section of your Control Panel in Windows™, under the "Pointer Options" tab adjust the "Select Pointer Speed" bar to faster for more sensitive movement, less for slower move ... shawn walters Mon, 29 Apr 2013 19:31:16 GMT http://www.xgaming.com/support/questions/52/ NOTE: The X-Arcade™ requires a PS/2 keyboard to be plugged into it to work in a PS/2 port. Turn off your antivirus software. Antivirus software when set to automatically scan for viruses, m ... shawn walters Mon, 29 Apr 2013 19:30:53 GMT http://www.xgaming.com/support/questions/48/ Handheld gamepads for newer game consoles feature both digital and analog controlling devices. Most games use the D-pad and/or left thumbstick to operate a game. The X-Arcade™ supports only ... shawn walters Mon, 29 Apr 2013 19:30:17 GMT http://www.xgaming.com/support/questions/46/ USB Connection: The X-Arcade™ comes with both USB and PS/2 connection options, it is recommended to use the USB connection if you have a wireless or USB keyboard. Connected this way you do n ... shawn walters Mon, 29 Apr 2013 19:29:55 GMT http://www.xgaming.com/support/questions/45/ Tripping over the wires, or dropping any product can cause a connection to go bad. If you feel that you have a connection issue, you next want to determine if it caused by A) the serial cable, B) ... shawn walters Mon, 29 Apr 2013 19:29:37 GMT http://www.xgaming.com/support/questions/42/ Before you begin, first use the instructions here to open the X-Arcade™ controller.PCB and PCB-Cable replacement procedure: PCB-Cable replacement procedure: Open the X-Arcade. Remov ... shawn walters Mon, 29 Apr 2013 19:28:59 GMT http://www.xgaming.com/support/questions/40/ To replace a microswitch: Open the X-Arcade™ as instructed. PIC: Pull back the tallest plastic part holding the button in place. PIC: Lift the front part of the microswitch back. PIC: Rem ... shawn walters Mon, 29 Apr 2013 19:28:33 GMT http://www.xgaming.com/support/questions/38/ The first thing you want to do is test the X-Arcade™ using the X-Arcade™ Test Utility program. This program can be run on a PC only, but should still be your first step to solving an ... shawn walters Mon, 29 Apr 2013 19:28:09 GMT http://www.xgaming.com/support/questions/14/ The X-Arcade™ was built with internal electronics to be compatible with the major past, present and FUTURE game systems. as well as any PC with no special drivers required. Once you ... shawn walters Mon, 29 Apr 2013 19:19:13 GMT http://www.xgaming.com/support/questions/39/ The X-Arcade™ was made to be user serviceable, just like a real arcade. It does not void the Lifetime Warranty to open it. To open the X-Arcade™: First disconnect the X ... shawn walters Mon, 29 Apr 2013 19:14:19 GMT http://www.xgaming.com/support/questions/50/ If your trackball is having connection issues or button issues, open the bottom of your controller and make sure none of the spare trackball cables are touching each other or anything else inside. ... shawn walters Mon, 29 Apr 2013 19:13:52 GMT http://www.xgaming.com/support/questions/32/ FIRST: DO NOT USE THIRD-PARTY PS/2-USB ADAPTERS Please NOTE: If you are using an older model X-Arcade and trying to use a third-party PS/2-USB Adapter, it will not work and is not supported. You m ... shawn walters Thu, 18 Apr 2013 16:13:48 GMT http://www.xgaming.com/support/questions/125/ A spinner control allows you to play games such as tempest the way they were originally played. And while the X-Arcade doesn't include a spinner, it is actually quite easy for anyone to add one ... shawn walters Wed, 21 Nov 2012 19:22:35 GMT http://www.xgaming.com/support/questions/4/ We have created the X-Arcade™ Test Utility Program to test the buttons and directions on the X-Arcade™ (microswitches), proper connection to the PC, as well as verifying that it is ... shawn walters Mon, 16 Jan 2012 18:55:29 GMT http://www.xgaming.com/support/questions/54/ X-Arcade™ BYO Kit Advanced Installation Diagram Click to Download Wiring pinout for Mode switch and PCB-Cable. Old Serial-PS/2 Cable Pinout Here Trackball wiring: The Track ... shawn walters Wed, 04 Jan 2012 20:59:24 GMT http://www.xgaming.com/support/questions/41/ If a joystick is sticking in one direction, or you would like to make your joystick more sensitive to movements for a fighting game, adjusting the microswitch sensitivity is your answer. A good ... shawn walters Wed, 04 Jan 2012 20:31:22 GMT http://www.xgaming.com/support/questions/84/ Trackball Games shawn walters Tue, 05 Aug 2008 21:12:04 GMT