http://www.xgaming.com/support en-us http://www.xgaming.com/support ActiveKB NX support@xgaming.com Sun, 19 May 2013 18:33:01 EDT 20 http://www.xgaming.com/support/questions/15/ The X-Arcade™ was designed to be used with a variety of games and emulators, and will work with virtually any game or emulator on your PC in the default Mode1 without programming. Always try ... shawn walters Fri, 10 May 2013 20:55:59 GMT http://www.xgaming.com/support/questions/52/ NOTE: The X-Arcade™ requires a PS/2 keyboard to be plugged into it to work in a PS/2 port. Turn off your antivirus software. Antivirus software when set to automatically scan for viruses, m ... shawn walters Mon, 29 Apr 2013 19:30:53 GMT http://www.xgaming.com/support/questions/48/ Handheld gamepads for newer game consoles feature both digital and analog controlling devices. Most games use the D-pad and/or left thumbstick to operate a game. The X-Arcade™ supports only ... shawn walters Mon, 29 Apr 2013 19:30:17 GMT http://www.xgaming.com/support/questions/46/ USB Connection: The X-Arcade™ comes with both USB and PS/2 connection options, it is recommended to use the USB connection if you have a wireless or USB keyboard. Connected this way you do n ... shawn walters Mon, 29 Apr 2013 19:29:55 GMT http://www.xgaming.com/support/questions/45/ Tripping over the wires, or dropping any product can cause a connection to go bad. If you feel that you have a connection issue, you next want to determine if it caused by A) the serial cable, B) ... shawn walters Mon, 29 Apr 2013 19:29:37 GMT http://www.xgaming.com/support/questions/42/ Before you begin, first use the instructions here to open the X-Arcade™ controller.PCB and PCB-Cable replacement procedure: PCB-Cable replacement procedure: Open the X-Arcade. Remov ... shawn walters Mon, 29 Apr 2013 19:28:59 GMT http://www.xgaming.com/support/questions/40/ To replace a microswitch: Open the X-Arcade™ as instructed. PIC: Pull back the tallest plastic part holding the button in place. PIC: Lift the front part of the microswitch back. PIC: Rem ... shawn walters Mon, 29 Apr 2013 19:28:33 GMT http://www.xgaming.com/support/questions/38/ The first thing you want to do is test the X-Arcade™ using the X-Arcade™ Test Utility program. This program can be run on a PC only, but should still be your first step to solving an ... shawn walters Mon, 29 Apr 2013 19:28:09 GMT http://www.xgaming.com/support/questions/36/ You can plug in up to 2 X-Arcade™ dual controllers or 4 X-Arcade™ Solo 1-Player controllers on your PC or Mac.You can connect all of them into USB ports, or plug one X-Arcade™ i ... shawn walters Mon, 29 Apr 2013 19:27:16 GMT http://www.xgaming.com/support/questions/24/ MAME™ Help shawn walters Mon, 29 Apr 2013 19:24:50 GMT http://www.xgaming.com/support/questions/14/ The X-Arcade™ was built with internal electronics to be compatible with the major past, present and FUTURE game systems. as well as any PC with no special drivers required. Once you ... shawn walters Mon, 29 Apr 2013 19:19:13 GMT http://www.xgaming.com/support/questions/39/ The X-Arcade™ was made to be user serviceable, just like a real arcade. It does not void the Lifetime Warranty to open it. To open the X-Arcade™: First disconnect the X ... shawn walters Mon, 29 Apr 2013 19:14:19 GMT http://www.xgaming.com/support/questions/32/ FIRST: DO NOT USE THIRD-PARTY PS/2-USB ADAPTERS Please NOTE: If you are using an older model X-Arcade and trying to use a third-party PS/2-USB Adapter, it will not work and is not supported. You m ... shawn walters Thu, 18 Apr 2013 16:13:48 GMT http://www.xgaming.com/support/questions/106/ Find the grind: The X-Arcade™ was made to be user serviceable, just like a real arcade. It does not void the Lifetime Warranty to open it. First you will need to open the X-Arcade ... shawn walters Wed, 28 Nov 2012 18:39:43 GMT http://www.xgaming.com/support/questions/10/ If you are playing a game like Pac-Man™ or Donkey Kong™ and find that the joystick gets stuck when changing directions, this is because these original arcade games used 4-way restricte ... shawn walters Wed, 28 Nov 2012 18:35:42 GMT http://www.xgaming.com/support/questions/83/ You will find basic size dimensions for all of our products under "Specs" at the bottom of the product's page. More detailed dimensions can be found in our e-brochure below: Tankstick Dimensions ... shawn walters Wed, 28 Nov 2012 17:47:30 GMT http://www.xgaming.com/support/questions/62/ X-Arcade Logo Cabinet MarqueeHere is a high-res X-Arcade logo you can use for a marquee: X-Arcade Logo MarqueeX-Arcade Machine Side ArtworkHere is the X-Arcade Machine cabinet side art layout for ... shawn walters Wed, 28 Nov 2012 17:45:07 GMT http://www.xgaming.com/support/questions/113/ Add Extra Key Functions to your X-Arcade on PC and for MAMEYou can use AutoHotkey to not only software reprogram your X-Arcade keys on PC, but also to make macros (a set of keys that makes a sting ... shawn walters Wed, 28 Nov 2012 17:16:48 GMT http://www.xgaming.com/support/questions/125/ A spinner control allows you to play games such as tempest the way they were originally played. And while the X-Arcade doesn't include a spinner, it is actually quite easy for anyone to add one ... shawn walters Wed, 21 Nov 2012 19:22:35 GMT http://www.xgaming.com/support/questions/124/ Using The X-Arcade with Atari Anniversary Edition NOTE: Skip any menus that ask you to install Direct X, a new version will already be installed in any modern Windows operating system. Be sure the ... shawn walters Mon, 19 Nov 2012 20:39:13 GMT http://www.xgaming.com/support/questions/89/ For the X-Arcade Controllers:You can purchase a DB9 Serial Switchbox and some extra serial cables to easily switch between one or more game consoles. Simply connect one serial cable between the IN ... shawn walters Mon, 05 Nov 2012 20:05:52 GMT http://www.xgaming.com/support/questions/107/ Super Street Fighter IV™: Arcade Edition Setup: Luckily Capcom® fixed the keyboard problem found in Street Fighter IV™ in Super Street Fighter IV: Arcade Edition™ (make sur ... shawn walters Mon, 29 Oct 2012 17:55:34 GMT http://www.xgaming.com/support/questions/82/ Emulation isn't only for PC anymore. You can now play many emulators in cluding MAME on nearly every game console. This usually requires the console to either have a modechip or to be sotmodded (s ... shawn walters Wed, 09 May 2012 22:53:42 GMT http://www.xgaming.com/support/questions/119/ M.U.G.E.N. is a 2D fighting game engine that is enables you to create commercial-quality fighting games. Almost everything can be customized, from individual characters to stages, as well as t ... shawn walters Wed, 29 Feb 2012 19:31:23 GMT http://www.xgaming.com/support/questions/4/ We have created the X-Arcade™ Test Utility Program to test the buttons and directions on the X-Arcade™ (microswitches), proper connection to the PC, as well as verifying that it is ... shawn walters Mon, 16 Jan 2012 18:55:29 GMT http://www.xgaming.com/support/questions/41/ If a joystick is sticking in one direction, or you would like to make your joystick more sensitive to movements for a fighting game, adjusting the microswitch sensitivity is your answer. A good ... shawn walters Wed, 04 Jan 2012 20:31:22 GMT http://www.xgaming.com/support/questions/27/ X-Arcade™ Dual & Solo Joystick - English - Spanish - French shawn walters Thu, 08 Sep 2011 17:45:25 GMT http://www.xgaming.com/support/questions/34/ The X-Arcade™ Coin Door works with any X-Arcade product!Here is a guide for using any other coin door with the X-Arcade™ shawn walters Fri, 12 Aug 2011 22:05:23 GMT http://www.xgaming.com/support/questions/74/ If your Mac is freezing or running very slowly you can disable the agent causing the problems following steps below: Click Mac HD System Library UserEventplugins Highlight the AppleHI ... shawn walters Mon, 10 Jan 2011 20:47:41 GMT http://www.xgaming.com/support/questions/35/ How do I use the X-Arcade™ Tankstick with GameTap™? GameTap ditched their awesome client software in favor of web browser-based gameplay to the distaste of many (including us). These ... shawn walters Fri, 09 Oct 2009 19:15:02 GMT http://www.xgaming.com/support/questions/73/ Many people ask us how they can mount their X-Arcade controller to a home-made cabinet. But the X-Arcade controllers were not built with the sole purpose of mounting to cabinets in mind, and since ... shawn walters Wed, 07 Oct 2009 19:35:16 GMT http://www.xgaming.com/support/questions/80/ BUTTONS/JOYS:The X-Arcade USB cable for the buttons/joys is very sensitive and cannot be extended with just a standard USB extension cable. Instead use an active USB Repeater Extension Cable. You ... shawn walters Thu, 02 Jul 2009 16:26:55 GMT http://www.xgaming.com/support/questions/77/ On a PC or Mac™, the buttons and joysticks are assigned to keyboard and mouse keys, think of the X-Arcade™ as an integrated keyboard (and if you have a trackball, it just acts like a mouse). When ... shawn walters Mon, 01 Dec 2008 18:20:31 GMT http://www.xgaming.com/support/questions/58/ It is usually best to simply use the USB connection for laptops. It is also important to make sure NUMLOCK is ON (otherwise Joy1 will act as arrow keys instead of NUMPAD numbers). To turn NumLoc ... shawn walters Fri, 16 May 2008 18:07:13 GMT http://www.xgaming.com/support/questions/11/ The "StickyKeys" shortcut is activated by hitting the Shift key 5 times on your keyboard. To disable it:Hit the Shift key 5 times to activate the StickyKeys shortcut (if it does not come up, the ... shawn walters Fri, 16 May 2008 13:58:06 GMT