http://www.xgaming.com/support en-us http://www.xgaming.com/support ActiveKB NX support@xgaming.com Thu, 20 Jun 2013 04:45:46 EDT 20 http://www.xgaming.com/support/questions/4/ We have created the X-Arcade™ Test Utility Program to test the buttons and directions on the X-Arcade™ (microswitches), proper connection to the PC, as well as verifying that it is ... shawn walters Tue, 18 Jun 2013 19:50:34 GMT http://www.xgaming.com/support/questions/32/ FIRST: DO NOT USE THIRD-PARTY PS/2-USB ADAPTERS Please NOTE: If you are using an older model X-Arcade and trying to use a third-party PS/2-USB Adapter, it will not work and is not supported. You ... shawn walters Tue, 18 Jun 2013 19:41:44 GMT http://www.xgaming.com/support/questions/45/ Tripping over the wires, or dropping any product can cause a connection to go bad. If you feel that you have a connection issue, you next want to determine if it caused by one of the following: t ... shawn walters Tue, 18 Jun 2013 19:37:56 GMT http://www.xgaming.com/support/questions/46/ USB Connection: The X-Arcade™ comes with both USB and PS/2 connection options, it is recommended to use the USB connection if you have a wireless or USB keyboard. Connected this way you do n ... shawn walters Fri, 24 May 2013 19:25:06 GMT http://www.xgaming.com/support/questions/52/ NOTE: The X-Arcade™ requires a PS/2 keyboard to be plugged into it to work in a PS/2 port. NOTE2: A 3rd-party PS/2-USB adapter will not work. Turn off your antivirus software. Antivirus soft ... shawn walters Fri, 24 May 2013 19:18:43 GMT http://www.xgaming.com/support/questions/15/ The X-Arcade™ was designed to be used with a variety of games and emulators, and will work with virtually any game or emulator on your PC in the default Mode1 without programming. Always try ... shawn walters Fri, 10 May 2013 20:55:59 GMT http://www.xgaming.com/support/questions/48/ Handheld gamepads for newer game consoles feature both digital and analog controlling devices. Most games use the D-pad and/or left thumbstick to operate a game. The X-Arcade™ supports only ... shawn walters Mon, 29 Apr 2013 19:30:17 GMT http://www.xgaming.com/support/questions/42/ Before you begin, first use the instructions here to open the X-Arcade™ controller.PCB and PCB-Cable replacement procedure: PCB-Cable replacement procedure: Open the X-Arcade. Remov ... shawn walters Mon, 29 Apr 2013 19:28:59 GMT http://www.xgaming.com/support/questions/40/ To replace a microswitch: Open the X-Arcade™ as instructed. PIC: Pull back the tallest plastic part holding the button in place. PIC: Lift the front part of the microswitch back. PIC: Rem ... shawn walters Mon, 29 Apr 2013 19:28:33 GMT http://www.xgaming.com/support/questions/38/ The first thing you want to do is test the X-Arcade™ using the X-Arcade™ Test Utility program. This program can be run on a PC only, but should still be your first step to solving an ... shawn walters Mon, 29 Apr 2013 19:28:09 GMT http://www.xgaming.com/support/questions/37/ The X-Arcade works brilliantly with Pinball Emulators due to the native Pinball Side Buttons on the X-Arcade. The Tankstick version has DUAL PINBALL BUTTONS. For the Tankstick: 2 of the buttons a ... shawn walters Mon, 29 Apr 2013 19:27:44 GMT http://www.xgaming.com/support/questions/36/ You can plug in up to 2 X-Arcade™ dual controllers or 4 X-Arcade™ Solo 1-Player controllers on your PC or Mac.You can connect all of them into USB ports, or plug one X-Arcade™ i ... shawn walters Mon, 29 Apr 2013 19:27:16 GMT http://www.xgaming.com/support/questions/24/ MAME™ Help shawn walters Mon, 29 Apr 2013 19:24:50 GMT http://www.xgaming.com/support/questions/89/ For the X-Arcade Controllers:You can purchase a DB9 Serial Switchbox and some extra serial cables to easily switch between one or more game consoles. Simply connect one serial cable between the IN ... shawn walters Mon, 05 Nov 2012 20:05:52 GMT http://www.xgaming.com/support/questions/54/ X-Arcade™ BYO Kit Advanced Installation Diagram Click to Download Wiring pinout for Mode switch and PCB-Cable. Old Serial-PS/2 Cable Pinout Here Trackball wiring: The Track ... shawn walters Wed, 04 Jan 2012 20:59:24 GMT http://www.xgaming.com/support/questions/41/ If a joystick is sticking in one direction, or you would like to make your joystick more sensitive to movements for a fighting game, adjusting the microswitch sensitivity is your answer. A good ... shawn walters Wed, 04 Jan 2012 20:31:22 GMT http://www.xgaming.com/support/questions/30/ Build Your Own Arcade Kit Manual Advanced BYO Kit color installation diagram with wiring schematic. shawn walters Thu, 15 Sep 2011 16:11:37 GMT http://www.xgaming.com/support/questions/34/ The X-Arcade™ Coin Door works with any X-Arcade product!Here is a guide for using any other coin door with the X-Arcade™ shawn walters Fri, 12 Aug 2011 22:05:23 GMT http://www.xgaming.com/support/questions/74/ If your Mac is freezing or running very slowly you can disable the agent causing the problems following steps below: Click Mac HD System Library UserEventplugins Highlight the AppleHI ... shawn walters Mon, 10 Jan 2011 20:47:41 GMT http://www.xgaming.com/support/questions/35/ How do I use the X-Arcade™ Tankstick with GameTap™? GameTap ditched their awesome client software in favor of web browser-based gameplay to the distaste of many (including us). These ... shawn walters Fri, 09 Oct 2009 19:15:02 GMT http://www.xgaming.com/support/questions/80/ BUTTONS/JOYS:The X-Arcade USB cable for the buttons/joys is very sensitive and cannot be extended with just a standard USB extension cable. Instead use an active USB Repeater Extension Cable. You ... shawn walters Thu, 02 Jul 2009 16:26:55 GMT http://www.xgaming.com/support/questions/58/ It is usually best to simply use the USB connection for laptops. It is also important to make sure NUMLOCK is ON (otherwise Joy1 will act as arrow keys instead of NUMPAD numbers). To turn NumLoc ... shawn walters Fri, 16 May 2008 18:07:13 GMT http://www.xgaming.com/support/questions/11/ The "StickyKeys" shortcut is activated by hitting the Shift key 5 times on your keyboard. To disable it:Hit the Shift key 5 times to activate the StickyKeys shortcut (if it does not come up, the ... shawn walters Fri, 16 May 2008 13:58:06 GMT