Knowledgebase Home | Contact Knowledgebase Home
Marquees, Side Art, Overlays, etc.
Article Details

Last Updated
7th of August, 2015

X-Arcade Machine Custom Artwork Kit

Files can be saved as a Photoshop (.psd), Illustrator (.ai), layered .pdf (ready for print, high quality), flat .pdf without template on with bleed, or .eps without template visible with bleed. RGB is the color mode we print in and will give you the best color with the printer we use, but we can print in CMYK as well. Photoshop and Illustrator files will allow us to edit anything if needed.  NOTE: If you ordered an X-Arcade Machine cabinet with the artwork option, this includes the side art and marquee only (we cannot apply control panel artwork).

The X-Arcade Machine's marquee is approximately 24.75" x 7.25", but there is a wood frame around that size bringing the viewable size you actually see of the logo down to about 23.5" x 6".

X-Arcade Machine Artwork


X-Arcade Machine Front Door

Machine Artwork Samples


X-Arcade "Lumber Jacques" Custom Artwork Kit

NOTE: If you ordered an X-Arcade "Lumber Jacques"cabinet with the artwork option, this includes the side art and marquee only (we cannot apply control panel artwork). 
IMPORTANT:
 Printing for the side panels must be limited to the area of current Lumber Jacques graphic, we cannot print full body over the blue wood. 

https://dl.dropboxusercontent.com/u/52704498/X-KONG-lumber-jacques%202.zip 


X-Arcade Controller Art Overlays

Tankstick - Dual

X-Arcade Logo

X-Arcade Logo

Here you will find some X-Arcade owners working on custom layout overlays for the X-Arcade controllers:

X-Arcade Controller Overlays

Tankstick Overlay

Custom Artwork

If you are looking for a custom marquee, side artwork, or control panel art, check out GameOnGrafix.com, they customize:

Related Articles
Attachments
No attachments were found.