Knowledgebase Home | Contact Knowledgebase Home
How do I use the X-Arcade™ on my laptop?
Article Details

Last Updated
16th of May, 2008

It is usually best to simply use the USB connection for laptops. It is also important to make sure NUMLOCK is ON (otherwise Joy1 will act as arrow keys instead of NUMPAD numbers). To turn NumLock on with a laptop, usually you will find a blue colored "Fn" key that must be held while pressing another key labeled "Num Lk". Refer to your laptop's manual for more help with this.

PS/2 Connection: The X-Arcade™ will not work in the PS/2 keyboard port unless a keyboard is plugged into the back of the X-Arcade™. You need to boot the laptop up with the X-Arcade™ already plugged in and set to MODE 1 (switch on back closest to the serial connection), and with a PS/2 keyboard plugged into the back of the X-Arcade™.

If you have a PS/2 only X-Arcade™ you may simply need our USB X-Adapter™. NOTE: The only USB adapter that will work properly with the X-Arcade™ is the one that was made for it, a standard PS/2-USB will not work

Related Articles
No related articles were found.
Attachments
No attachments were found.