To replace a microswitch:

1. Open the X-Arcade™ as instructed.
2. PIC: Pull back the tallest plastic part holding the button in place.
3. PIC: Lift the front part of the microswitch back.
4. PIC: Remove the microswitch.
5. PIC: To remove the the wires from the switch, use your fingers or pliers if needed on the connectors. DO NOT pull on the wires.
6. PIC: To put a microswitch in, start by snapping the back of the new microswitch in first, then rock the front down and snap it into place as shown in step 2.