We have created the X-Arcade™ Test Utility Program to test the buttons and directions on the X-Arcade™ (microswitches), proper connection to the PC, as well as verifying that it is ready for MAME™. This program should be your first step to solving problems. Requires Java™.
PREPARE FOR TEST: Be sure you are plugging into a USB port directly on the back of the PC (not in the front, not in a USB Hub, not with an extension cable, not with a fox in a box). Run the test in Mode1; move the switch on the back of the X-Arcade™ to Mode1 (the position closest to the serial connector), then push the button on the back of the X-Arcade™ twice (the light on the X-Arcade™ should turn off from the first push, and back on with the second). International users must set their keyboard to US101 or the inputs won't match up.
TEST RESULTS: Run the test to see the pictured X-Arcade™ respond to your button presses and joystick movements. If the X-Arcade™ does not respond in the test at all, click here to verify proper connection. If a single button or direction is sticking or does not work click here for more help.
TANKSTICK/TRACKBALL: The Trackball and trackball/mouse buttons do not get tested in this program as it simply acts like a mouse, moving your cursor on screen. There are 2 sets of pinball buttons on the Tankstick, the two closest to you are keyboard keys and should show they are working in the test program, but the two furtherst from you are mouse buttons that won't show up in the test program. The back left is mouse left-click, the back right is right-click.
Click here to use our web-based test program!
Alternatively you can download the test (Requires Java™.)
OTHER WAYS TO TEST:
In any Operating System you can also simply use a word editor to test that the X-Arcade™ types the functions shown on the default Mode1 button layout. Note that some of the buttons are set to CRTL, ALT, and SHIFT, these buttons will not type anything.
MAC USERS: If you have a Mac, you can use Keyboard Viewer (or KeyCaps pre-OSX) to test that the X-Arcade™ types the functions shown on the default Mode1 button layout.