We have created the X-Arcade™ Test Utility Program to test the buttons and directions on the X-Arcade™ (microswitches) , proper connection to the PC, as well as verifying that it is ready for MAME™. This program should be your first step to solving problems. 

Run the test in mode 1 to see the pictured X-Arcade™ respond as you do.

TEST RESULTS: If the X-Arcade™ does not respond in the test at all, click here to verify proper connection. If a single button or direction is sticking or does not work, click here for more help.

TRACKBALL: The Trackball will simply act like a mouse, moving your cursor on screen.

Click here to use our web-based test program!

Alternatively you can download the test.

OTHER WAYS TO TEST:

In any Operating System you can also simply use a word editor to test that the X-Arcade™ types the functions shown on the default Mode1 button layout. Note that some of the buttons are set to CRTL, ALT, and SHIFT, these buttons will not type anything.

PC USERS: Old Test Program

To use the test:

• Be sure NUM LOCK is ON on your keyboard for the test. (On a laptop this is often done by holding a blue "Fn" key and pressing another key at the same time to enable it.)
• Be sure that you are using the "Standard US" keyboard layout in your operating system or some buttons may type different keys.
• Move the switch on the back of the X-Arcade™ to Mode1(the position closest to the serial port), the push the button on the back of the X-Arcade™ twice (the light on the X-Arcade™ should turn off from the first push, and back on with the second) to load Mode1.
• You do not need to hit "F1" as indicated in the test utility, simply push the buttons and move the joysticks on the X-Arcade™ once the program is running and the pictured X-Arcade™ should move accordingly.
• Download X-Arcade™ Test Program

MAC USERS: If you have a Mac, you can use Keyboard Viewer (or KeyCaps pre-OSX) to test that the X-Arcade™ types the functions shown on the default Mode1 button layout.