Knowledgebase Home | Contact Knowledgebase Home
2in1 X-Adapter Help & Instructions - PlayStation 3 & Original Xbox- PS3
Article Details

Last Updated
12th of September, 2011



NOTE: Sony® has previously attempted in the past to 'block' third-party hardware via Firmware Updates. Before updating your PlayStation 3 firmware, please visit this page. Though we have done everything possible to avoid compatibility problems with our hardware, we cannot guarantee or protect against Sony® 'bricking' your adapter. 

IMPORTANT – READ BEFORE INSTALLATION
  • DO NOT plug the 2in1 X-Adapter™ into more than one console at a time. Doing so may damage the X-Adapter™.
  • Make sure to note the section on Digital/Analog, which will alleviate many issues you may encounter. 
  • Programming is for the PC/Mac™ only, and has no function on game consoles.
  • The Trackball is not supported by the 2in1 X-Adapter™. You may however be able to use the trackball in the USB port of your console directly.
  • PlayStation 3: You will need to press Select+Start on the X-Arcadewhen you first plug in the controller or turn on the PS3 system (Lights flashing), and anytime you see "Press the PS Button" displayed on the screen.
    To access the PS3 Cross Media Bar (XMB) during gameplay, simply press Select+Start on the X-Arcade. You can also press and hold Select+Start to access the PS3 system menu.
    To reassign controllers, (using the controller you want to reassign) go to "Settings" in the XMB, go to "Accessory Settings", and choose "Reassign Controllers". Simply change to the number you prefer. See "Player Assignment" in the layout above for
    LED color association.
    To switch between Analog and Digital modes during a PS1 or PS2 game, press Select+Start, choose "Controller Settings" then "Switch Analog Mode". You can also reassign controllers from this menu.
PlayStation 3: You will need to press Select+Start on the X-Arcadewhen you first plug in the controller or turn on the PS3 system (Lights flashing), and anytime you see "Press the PS Button" displayed on the screen. To access the PS3 Cross Media Bar (XMB) during gameplay, simply press Select+Start on the X-Arcade. You can also press and hold Select+Start to access the PS3 system menu.

 

OPERATION WITH GAME CONSOLES

On gaming consoles, the unit operates just like a standard gamepad, with buttons assigned to the arcade buttons. See the appendix for the appropriate button legend for your game system. You can play with four players using two X-Arcades™ and two 2in1 X-Adapters™.

Digital vs. Analog Control Overview:
Handheld gamepad controllers for newer game consoles feature both digital and analog controlling devices, a D-pad and two analog thumbsticks. Most games use the D-pad and/or left thumbstick to operate a game. The X-Arcade™ supports only one digital joystick per player, therefore adjustments need to be made to select whether this joystick functions as the D-pad or the left analog thumbstick.  See the key legends for directions on switching between analog and digital on each console, but in general:

PlayStation 3™, Xbox™:
  Side Button + Button 1 (Top-left) = Digital (D-PAD)
 
Side Button + Button 2 (Top-middle) = Analog 1 (primary thumbstick)
 
Side Button + Button 3 (Top-right) = Analog 2 (secondary thumbstick)

Analog Tilt Sensitivity
While using Analog 1 mode (Select+Button 2) you can change how sensitive the movement is from normal full-tilt (default) to half-tilt sensitivity. Half-tilt sensitivity would be equal to moving the analog thumbstick on your gamepad to about halfway in any direction instead of fully (full-tilt). This is useful for games that you need more precise movement in, for example in a racing game, or to make your character move slower in your game.

Tilt Sensitivity Mode Toggle:
 
Side Button + Button 7 = Half-Tilt Sensitivity
 
Side Button + Button 8 = Full-Tilt Sensitivity (default)

DualStick Mode (2-Player X-Arcades Only):
Some games may require the use of 2 control devices simultaneously, for example console versions of arcade classics like Robotron™, SmashTV™, Crazy Climber™, and Karate Champ™. While the X-Arcade™ is not ideal for all types of games, for example first-person shooters, it now has the ability to play all of them thanks to the new DualStick Mode.

DualStick Mode makes the second player joystick of a dual X-Arcade™ act like the right analog thumbstick on a gamepad. But it also makes the buttons on the player 2 side mirror those of the player 1 side, so the buttons on both sides can be used for single-player gameplay. As you may have gathered, this means that DualStick mode is for single-person gameplay, and requires a 2-player X-Arcade™ controller, it will have no affect on an X-Arcade Solo™ for example.

DualStick mode is toggled on and off by pressing the Modifier and button 6 simultaneously, and while in DualStick mode you can still change Joystick 1 between D-PAD and analog thumbstick as usual.

 

TROUBLESHOOTING

Here are some suggestions if you are experiencing problems:

  • The first thing you want to do is test the X-Arcade™ on your PC using the X-Arcade™ Test Utility Program to check that all buttons are working properly, especially the Select and Start buttons. If your controller works in the X-Arcade™ Test Program, then your controller is fine. Run the X-Arcade™ Test Program. 
  • Make sure all of your connections are tight and secure. If the X-Arcade’s™ LED light is on, you should have a secure, tight connection.

THE ADAPTER IS JUST FLASHING!
You must press Select+Start to initialize the adapter and make it stop blinking. If this is still not working, unplug the 2in1 adapter from the PS3 console, turn off your PS3 completely by turning off the main power switch on the back of the PS3 console, wait a few seconds before turning it back on. Then once fully booted to the XMB menu, plug the 2in1 back into the console and try initializing it again. If it still does not work, try your controller on our test program to make sure all of the buttons are working, especially the Select and Start buttons. You can also use the PC USB cable that came with your X-Arcade™ to see if you can move around the main XMB menu on the PS3, this will tell you if your PS3's USB ports are working properly. 

I CAN’T MOVE AROUND IN THE GAME MENU!
The game you are playing may require that you use the digital control to navigate the menu, you might be in analog mode (or vice-versa). Change the mode of your joystick as instructed.

THE CONTROLLER IS NOT WORKING ON MY PS3 GAME!
Make sure that controller that you are trying to use is assigned to player 1. Some games can only be controlled with the controller assigned to controller 1. If the game will not start, reassign the controller to player 1.

MY CONTROLLER IS NOT WORKING ON PSX GAMES!
Some older PSX games need to use True Digital mode.

HOW DO I ACCESS THE PS3 BUTTON FUNCTIONS?
To access the PS3 Cross Media Bar (XMB) during gameplay, simply press Select+Start on the X-Arcade. You can also hold Select+Start to access the PS3 system menu.

PLAYER 1 AND PLAYER 2 CONTROLS ARE REVERSED!
You either need to reassign your controller, have the cables reversed (Xbox only), or you are in DualStick Mode.

MY CHARACTER IS MOVING SLOWLY!
You are in Slow Tilt Sensitivity Mode.

Using the 2in1 adapter on PC:

The 2in1 adapter does not have native USB support for PC use, but with a special driver you can use it on your PC. Keep in mind that when it is connected this way, the X-Arcade acts as a GamePad instead of a keyboard.

Download MotioninJoy and install as instructed.

More help with MotioninJoy
Related Articles
No related articles were found.
Attachments
No attachments were found.