Knowledgebase Home > Support By Product > X-Arcade Tankstick/XXL | Contact Knowledgebase Home
View Articles by Category
There are no sub categories
X-Arcade Tankstick/XXL rss button
(Page 2 of 3)     «« | Prev | 1 | 2 | 3 | Next | »»
There were 44 articles found in this category:
  1. questionThe trackball moves erratically, sticks, or does not work...what can I do? Opening & Cleaning the Trackball.
    If your trackball is having connection issues or button issues, open the bottom of your controller and make sure none of the spare trackball cables are touching each other or anything else inside. You can tape them up if needed. Your X-Arcade™ Trackball may need to be opened and cleaned. ...

  2. questionHow can I make the X-Arcade™ Trackball more or less sensitive on my PC?
    Go to the "Mouse" section of your Control Panel in Windows™, under the "Pointer Options" tab adjust the "Select Pointer Speed" bar to faster for more sensitive movement, less for slower movement. This menu may be slightly different if you have 3rd party mouse software installed. Remember ...

  3. question"Device Not Recognized" when I plug In my X-Arcade™?
    FIRST: DO NOT USE THIRD-PARTY PS/2-USB ADAPTERS Please NOTE: If you are using an older model X-Arcade and trying to use a third-party PS/2-USB Adapter, it will not work and is not supported. You must follow instructions on Page 5 Of Manual or you'll need the USB Upgrade Kit No Special Drivers A ...

  4. questionMortal Kombat Komplete Edition PC Setup
    Mortal Kombat Komplete Edition PC Setup: Unfortunately NetherRealm Studios® did not put much thought into the control options in Mortal Kombat Komplete™ for PC. For example, you cannot play with 2 players on one keyboard or a keyboard encoder like have been used in many brands ...

  5. questionI have a loose connection somewhere or get no light, how can I fix it?
    Tripping over the wires, or dropping any product can cause a connection to go bad. If you feel that you have a connection issue, you next want to determine if it caused by one of the following: the console or PC Cable the PCB-Cable (USB models only) game console X-Adapter the X-Arcade controll ...

  6. questionHow do I use the X-Arcade™ with a USB or wireless keyboard?
    USB Connection: The X-Arcade™ comes with both USB and PS/2 connection options, it is recommended to use the USB connection if you have a wireless or USB keyboard. Connected this way you do not need to have a keyboard plugged into the X-Arcade™ to use it. NOTE: You do need to have a ...

  7. questionWhy is my keyboard double-typing, sticking, or freezing using X-Arcade™ on PS/2?
    NOTE: The X-Arcade™ requires a PS/2 keyboard to be plugged into it to work in a PS/2 port. NOTE2: A 3rd-party PS/2-USB adapter will not work. Turn off your antivirus software. Antivirus software when set to automatically scan for viruses, may have a default option to protect instant messen ...

  8. questionWhy doesn't my joystick control my character in my game on my game console?
    Handheld gamepads for newer game consoles feature both digital and analog controlling devices. Most games use the D-pad and/or left thumbstick to operate a game. The X-Arcade™ supports only one digital joystick per player, therefore a mode change needs to be made to select whether this jo ...

  9. questionHow do I replace a microswitch?
    To replace a microswitch: Open the X-Arcade™ as instructed. PIC: Pull back the tallest plastic part holding the button in place. PIC: Lift the front part of the microswitch back. PIC: Remove the microswitch. PIC: To remove the the wires from the switch, use your fingers or pliers if n ...

  10. questionHow can I use more than one X-Arcade™ (4-player) at a time on my PC?
    You can plug in up to 2 X-Arcade™ dual controllers or 4 X-Arcade™ Solo 1-Player controllers on your PC or Mac.You can connect all of them into USB ports, or plug one X-Arcade™ into the PS/2 port and any others into USB ports. You cannot plug one X-Arcade™ into another. ...

  11. questionMAME™ Help
    MAME™ Help

  12. questionX-Arcade™ Installation Guide
    The X-Arcade™ was built with internal electronics to be compatible with the major past, present and FUTURE game systems. as well as any PC with no special drivers required. Once you own the X-Arcade™controller, you will never need to buy another arcade joystick again! Use it for lif ...

  13. questionAdd Extra Key Functions to your X-Arcade on PC and for MAME, Including Macros
    Add Extra Key Functions to your X-Arcade on PC and for MAME You can use AutoHotkey to not only software reprogram your X-Arcade keys on PC, but also to make macros (a set of keys that makes a sting of keys get pressed in order). If you want to add extra key functions to the X-Arcade on PC, downl ...

  14. questionAdd a Spinner to your X-Arcade
    A spinner control allows you to play games such as tempest the way they were originally played. And while the X-Arcade doesn't include a spinner, it is actually quite easy for anyone to add one or more to it. First off, you will not be able to connect a spinner to the existing X-Arcade electroni ...

  15. questionAtari Anniversary Edition Help
    Using The X-Arcade with Atari Anniversary Edition NOTE: Skip any menus that ask you to install Direct X, a new version will already be installed in any modern Windows operating system. Be sure the X-Arcade is in Mode 1. Put the CD in the PC tray. If Autorun is enabled the main menu will pop up. ...

  16. questionHow can I easily switch between 2 or more game consoles?
    For the X-Arcade Controllers: You can purchase a DB9 Serial Switchbox and some extra serial cables to easily switch between one or more game consoles. Simply connect one serial cable between the IN port of the Switchbox and the X-Arcade™, and the other cables between the OUT ports and the ...

  17. questionM.U.G.E.N. - PC Guide
    M.U.G.E.N. is a 2D fighting game engine that is enables you to create commercial-quality fighting games. Almost everything can be customized, from individual characters to stages, as well as the look and feel of the game. Download M.U.G.E.N. Official M.U.G.E.N. Forum M.U.G.E.N. X-Arcade cont ...

  18. questionConnect A Coin Door for X-Arcade™
    The X-Arcade™ Coin Door works with any X-Arcade product! Here is a guide for using any other coin door with the X-Arcade™

  19. questionMac Is Freezing, or Running Slow With X-Arcade
    If your Mac is freezing or running very slowly you can disable the agent causing the problems following steps below: Click Mac HD System Library UserEventplugins Highlight the AppleHIDMouseAgent.plugin and delete Reboot your computer This will unload the HIDAgent hogging your resources. (Bug) ...

  20. questionMount an X-Arcade Controller to a Cabinet
    Many people ask us how they can mount their X-Arcade controller to a home-made cabinet. But the X-Arcade controllers were not built with the sole purpose of mounting to cabinets in mind, and since it is a custom arcade cabinet, it is really up to the builder to decide. John St. Clair wrote a gre ...

(Page 2 of 3)     «« | Prev | 1 | 2 | 3 | Next | »»