|View Articles by Category
There are no sub categories
There were 36 articles found in this category:
(Page 1 of 2)
- Test Your X-Arcade™ First! - Online Test Utility Program
We have created the X-Arcade™ Test Utility Program to test the buttons and directions on the X-Arcade™ (microswitches), proper connection to the PC, as well as verifying that it is ready for MAME™. This program should be your first step to solving problems. Requires Java&tra ...
- X-Arcade Machine Setup Guide, Manual and Support
Step One: Please Read the X-Arcade™ Machine Manual The manual provides an overview of how to setup and use your Machine, including pictures of how to install the Controller Tray and get everything up and running. This below page explains how to setup the PC and basic troubleshooting. You ...
- X-Arcade Arcade2TV Showcase Pedestal Setup Guide, Manual and Support
Step One: The X-Arcade Tankstick manual will explain the basic controls of the X-Arcade. If you plan on using Playstation 2 (Select Models Only) get help with Playstation 2 controls. Step Two: Quick Guide For Getting The Computer Installed: PLEASE READ THE MANUAL AND BELOW GUIDE BEFORE TURNING A ...
- How do I open the X-Arcade™?
The X-Arcade™ was made to be user serviceable, just like a real arcade. It does not void the Lifetime Warranty to open it. To open the X-Arcade™: First disconnect the X-Arcade™ from any systems, and remove the serial cable. Next turn the X-Arcade™ over on your ...
- How can I make the X-Arcade™ joystick more or less sensitive?
If a joystick is sticking in one direction, you have trouble hitting diagonals, or you would just like to make your joystick more sensitive to movements for a fighting game, adjusting the microswitch sensitivity is your answer. A good way to test if a microswitch direction is sticking because i ...
- How do I change the X-Arcade™ from 8-way to 4-way mode?
If you are playing a game like Pac-Man™ or Donkey Kong™ and find that the joystick gets stuck when changing directions, this is because these original arcade games used 4-way restricted joysticks, while the X-Arcade™ is set to 8-way mode by default. You can solve this with the ...
- X-Arcade™ Programming Guide
The X-Arcade™ was designed to be used with a variety of games and emulators, and will work with virtually any game or emulator on your PC in the default Mode1 without programming. Always try first to change the control settings in the emu/game rather than programming so you don't have to ...
- Marquees, Side Art, Overlays, etc.
X-Arcade Machine Custom Artwork Kit Files can be saved as a Photoshop (.psd), Illustrator (.ai), layered .pdf (ready for print, high quality), flat .pdf without template on with bleed, or .eps without template visible with bleed. RGB is the color mode we print in and will give you the best color ...
- Button or Joystick is sticking or not working? L@@K HERE!
The first thing you want to do is test the X-Arcade™ using the X-Arcade™ Test Utility program. This program can be run on a PC only, but should still be your first step to solving any problems. Download X-Arcade™ Test Utility Program If all of the buttons and joystick direc ...
- No light, or "Device Not Recognized" when I plug In my X-Arcade™?
FIRST: DO NOT USE THIRD-PARTY PS/2-USB ADAPTERS Please NOTE: If you are using an older model X-Arcade and trying to use a third-party PS/2-USB Adapter, it will not work and is not supported. You must follow instructions on Page 5 Of Manual or you'll need the USB Upgrade Kit No Special Drivers A ...
- Troubleshooting video and audio problems, or an "Over Specification" or "Out of Range" message on monitor.
If you are experiencing difficulty, first make sure that all cables are connected to their proper ports and are firmly connected and that you are getting power to the monitor, VGA adapter, speakers, and game console/PC. NOTE: If you bought an X-Arcade Machine cabinet with an included PC, you wi ...
- X-Arcade™ Installation Guide
The X-Arcade™ was built with internal electronics to be compatible with the major past, present and FUTURE game systems. as well as any PC with no special drivers required. Once you own the X-Arcade™controller, you will never need to buy another arcade joystick again! Use it for lif ...
- I have a loose connection somewhere or get no light, how can I fix it?
Tripping over the wires, or dropping any product can cause a connection to go bad. If you feel that you have a connection issue, you next want to determine if it caused by one of the following: the console or PC Cable the PCB-Cable (USB models only) game console X-Adapter the X-Arcade controll ...
- Emulation on Game Consoles
Emulation isn't only for PC anymore. You can now play many emulators including MAME on nearly every game console. This usually requires the console to either have a modchip or to be softmodded (software-hacked). Here is some basic information to on emulation on game consoles. Original Xbox: Cio ...
- Street Fighter IV & Super Street Fighter IV: AE - PC Setup
Super Street Fighter IV™: Arcade Edition Setup: Luckily Capcom® fixed the keyboard problem found in Street Fighter IV™ in Super Street Fighter IV: Arcade Edition™ (make sure you have the latest game patch). Simply be sure to have your X-Arcade™ plugged in before sta ...
- How do I replace the PCB board and/or cable in the X-Arcade™?
Before you begin, first use the instructions here to open the X-Arcade™ controller. PCB and PCB-Cable replacement procedure: PCB-Cable replacement procedure: Open the X-Arcade. Remove the PCB-Cable's two white molex connectors from the PCB by simply pulling them off carefully. Pull th ...
- Arcade Cabinet Repairs
If you damage your arcade product, don't dispair, it can be repaired to nearly new condition! Our arcade cabinets are made using black melamine. If you have a scratch you can fix it with an ebony/black furniture marker. These can be purchased at any local hardware store. If the wood is chipped ...
- What are the dimensions of your products?
You will find basic size dimensions for all of our products under "Specs" at the bottom of the product's page. More detailed dimensions can be found in our e-brochure below: Tankstick Dimensions (inches): Approx: 28.75x13 - Base: 25.5x10.25 15lbs. Height: front 4.75 back 3.25 Machine Dimension ...
- How can I disable 'Sticky Keys' and 'Filter Keys'?
The 'Sticky Keys' shortcut is activated by hitting the Shift key on your keyboard or button 4 on the X-Arcade 5 times. The 'Filter Keys' shortcut is activated by holding the Shift key on your keyboard or button 4 on the X-Arcade for 8 seconds. To disable them: Hit the Shift key 5 times to acti ...
- How can I play pinball games like Visual Pinball and Future Pinball with the X-Arcade?
The X-Arcade works brilliantly with Pinball Emulators due to the native Pinball Side Buttons on the X-Arcade. The Tankstick version has DUAL PINBALL BUTTONS. For the Tankstick: 2 of the buttons are native for mouse and many pinball games such as Visual Pinball that do not have native mouse butt ...
(Page 1 of 2)