 View Articles by Category |
|
|
Game Adapters
|
There were 16 articles found in this category:
 How can I make the X-Arcade™ joystick more or less sensitive?
If a joystick is sticking in one direction, or you would like to make your joystick more sensitive to movements for a fighting game, adjusting the microswitch sensitivity is your answer. A good way to test if a microswitch direction is sticking because it needs adjusted is to open our X-Arcade ...
- PC & MAC (Mode1) Button Layout
Printable button layout for PC and Mac.
- Why doesn't my joystick control my character in my game on my game console?
Handheld gamepads for newer game consoles feature both digital and analog controlling devices. Most games use the D-pad and/or left thumbstick to operate a game. The X-Arcade™ supports only one digital joystick per player, therefore a mode change needs to be made to select whether this jo ...
- How do I use the X-Arcade™ with a USB or wireless keyboard?
USB Connection: The X-Arcade™ comes with both USB and PS/2 connection options, it is recommended to use the USB connection if you have a wireless or USB keyboard. Connected this way you do not need to have a keyboard plugged into the X-Arcade™ to use it. NOTE: You do need to have a ...
- I have a loose connection somewhere, how can I fix it?
Tripping over the wires, or dropping any product can cause a connection to go bad. If you feel that you have a connection issue, you next want to determine if it caused by A) the serial cable, B) the PC or game console X-Adapter™, or C) the X-Arcade itself. Is it the PC/console X-Adapter& ...
- Xbox 360™ Adapter Button Layout and Instructions
We now offer a PlayStation 2™ to Xbox 360™ adapter, it requires one of our PlayStation 2 or 5in1 X-Adapters. Our Xbox 360™ ™ adapter will also allow you to use many other PS2 controllers on your Xbox 360™. Click here to order an Xbox 360™ adapter for the X-Ar ...
- How can I easily switch between 2 or more game consoles?
For the X-Arcade Controllers: You can purchase a DB9 Serial Switchbox and some extra serial cables to easily switch between one or more game consoles. Simply connect one serial cable between the IN port of the Switchbox and the X-Arcade™, and the other cables between the OUT ports and the ...
- Adapters for NES™, SNES™, Nintendo 64™ N64™, Famicom, Sega Saturn™ ,Genesis, , MegaDrive™, Master System™, NEO-GEO™, ATARI™, Turbo Grafx 16™, 3DO™, Amiga™, Mark III™, etc.
NES™, SNES™, Nintendo 64™ N64™, Famicom, Sega Saturn™ ,Genesis, , MegaDrive™, Master System™, NEO-GEO™, ATARI™, Turbo Grafx 16™, 3DO™, Amiga™, Mark III™ I'm afraid that we do not make adapters for outdated systems curr ...
- Emulation on Game Consoles
Emulation isn't only for PC anymore. You can now play many emulators in cluding MAME on nearly every game console. This usually requires the console to either have a modechip or to be sotmodded (software-hacked). Here is some basic information to on emulation on game consoles. Original Xbox: Cio ...
- Blank Diagram For PC Mode 2-4 Programming
Single (Click to print) Multiple (Click to print)
- Legacy Wii™/GameCube™ Layout - DISCONTINUED
This item has been discontinued and replaced by the 5in1 X-Adapter. The Nintendo Wii has GameCube controller ports on the top. The X-Arcade uses these ports to work on the Wii, and therefore only works with games that have GameCube controller support. This includes all GameCube games, Virtual C ...
- Legacy Playstation™ 1 & 2 Button Layout - DISCONTNUED
This item has been discontinued and replaced by the 5in1 X-Adapter.
- Legacy Dreamcast™ X-Adapter Button Layout- DISCONTINUED
This item has been discontinued and replaced by the 5in1 X-Adapter.
- Legacy Original XBOX™ Adapter Button Layout - DISCONTINUED
This item has been discontinued and replaced by the 2in1 X-Adapter.
- How can I extend the X-Arcade cables?
BUTTONS/JOYS: The X-Arcade USB cable for the buttons/joys is very sensitive and cannot be extended with just a standard USB extension cable. Instead use an active USB Repeater Extension Cable. You can also extend the cable when using the PS/2 connection by getting either a longer serial cable, b ...
- Why do directions/buttons stop working using the Y-Mouse™ USB Adapter?
The Y-Mouse USB adapter by default does not keep holding a button/keyboard key, it will stop holding it after a few seconds. All you need to do is change the mode of the Y-Mouse™ USB adapter so that it does hold. To do this, simply open a word editor like notepad, and on the keyboard that ...
|
