Knowledgebase Home > Support By Product > Dual & Solo Joystick | Contact Knowledgebase Home
View Articles by Category
There are no sub categories
Dual & Solo Joystick rss button
(Page 2 of 2)     «« | Prev | 1 | 2 | Next | »»
There were 40 articles found in this category:
  1. questionWhy doesn't my joystick control my character in my game on my game console?
    Handheld gamepads for newer game consoles feature both digital and analog controlling devices. Most games use the D-pad and/or left thumbstick to operate a game. The X-Arcade™ supports only one digital joystick per player, therefore a mode change needs to be made to select whether this jo ...

  2. questionHow can I disable 'Sticky Keys' and 'Filter Keys'?
    The 'Sticky Keys' shortcut is activated by hitting the Shift key on your keyboard or button 4 on the X-Arcade 5 times. The 'Filter Keys' shortcut is activated by holding the Shift key on your keyboard or button 4 on the X-Arcade for 8 seconds. To disable them: Hit the Shift key 5 times to acti ...

  3. questionHow do I replace the PCB board and/or cable in the X-Arcade™?
    Before you begin, first use the instructions here to open the X-Arcade™ controller. PCB and PCB-Cable replacement procedure: PCB-Cable replacement procedure: Open the X-Arcade. Remove the PCB-Cable's two white molex connectors from the PCB by simply pulling them off carefully. Pull th ...

  4. questionStreet Fighter IV & Super Street Fighter IV: AE - PC Setup
    Super Street Fighter IV™: Arcade Edition Setup: Luckily Capcom® fixed the keyboard problem found in Street Fighter IV™ in Super Street Fighter IV: Arcade Edition™ (make sure you have the latest game patch). Simply be sure to have your X-Arcade™ plugged in before sta ...

  5. questionEmulation on Game Consoles
    Emulation isn't only for PC anymore. You can now play many emulators including MAME on nearly every game console. This usually requires the console to either have a modchip or to be softmodded (software-hacked). Here is some basic information to on emulation on game consoles. Original Xbox: Cio ...

  6. questionI have a loose connection somewhere or get no light, how can I fix it?
    Tripping over the wires, or dropping any product can cause a connection to go bad. If you feel that you have a connection issue, you next want to determine if it caused by one of the following: the console or PC Cable the PCB-Cable (USB models only) game console X-Adapter the X-Arcade controll ...

  7. questionX-Arcade™ Installation Guide
    The X-Arcade™ was built with internal electronics to be compatible with the major past, present and FUTURE game systems. as well as any PC with no special drivers required. Once you own the X-Arcade™controller, you will never need to buy another arcade joystick again! Use it for lif ...

  8. questionHow can I use more than one X-Arcade™ (4-player) at a time on my PC or game console?
    PC/MAC: You can plug in up to 2 X-Arcade™ dual controllers or 4 X-Arcade™ Solo 1-Player controllers on your PC or Mac.You can connect all of them into USB ports, or plug one X-Arcade™ into the PS/2 port and any others into USB ports. You cannot plug one X-Arcade™ into an ...

  9. questionMortal Kombat X and Komplete Edition PC Setup
    Unfortunately NetherRealm Studios® did not put much thought into the control options in Mortal Kombat™ games for PC. For example, you cannot play with 2 players on one keyboard or a keyboard encoder like have been used in many brands of game controllers for years. We recommend that ...

  10. questionMount an X-Arcade Controller to a Cabinet
    Many people ask us how they can mount their X-Arcade controller to a home-made cabinet. But the X-Arcade controllers were not built with the sole purpose of mounting to cabinets in mind, and since it is a custom arcade cabinet, it is really up to the builder to decide. John St. Clair wrote a gre ...

  11. questionX-Arcade Wireless Options and Android iOS Support
    The X-Arcade can work wirelessly with the Mayflash brand PS2 wireless adapter for Android, iOS and PC together with our newest model 5in1 adapter (which does NOT have detachable cables). It will not work with the old 5in1 adapters that had detachable cables however. List of iCade iOS compatible ...

  12. questionJoystick Grinding or Squeaking When Moved
    Find the grind: The X-Arcade™ was made to be user serviceable, just like a real arcade. It does not void the Lifetime Warranty to open it. First you will need to open the X-Arcade™. Once open, the first thing to look for that could be causing the grinding is the cone-shaped piece (sh ...

  13. questionAndroid MAME4Droid and MAME4All on the X-Arcade
    The X-Arcade acts like a keyboard on both MAME4Droid and MAME4All (except on Ouya), simply connect using the USB port. If your android device doesn't have a USB port, you can make is work wirelessly with the Mayflash brand PS2 wireless adapter for Android together with our Dedicated PS2 adapter ...

  14. questionOuya with X-Arcade
    The X-Arcade is natively supported by the OUYA game console and simply acts like a single gamepad. This means it will work in the menus and in supported software. Unfortunately however, the OUYA developers made both players on a dual/Tankstick controller both act like the same controller, so yo ...

  15. questionAdd Extra Key Functions to your X-Arcade on PC and for MAME, Including Macros
    Add Extra Key Functions to your X-Arcade on PC and for MAME You can use AutoHotkey to not only software reprogram your X-Arcade keys on PC, but also to make macros (a set of keys that makes a sting of keys get pressed in order). If you want to add extra key functions to the X-Arcade on PC, downl ...

  16. questionAtari Anniversary Edition Help
    Using The X-Arcade with Atari Anniversary Edition NOTE: Skip any menus that ask you to install Direct X, a new version will already be installed in any modern Windows operating system. Be sure the X-Arcade is in Mode 1. Put the CD in the PC tray. If Autorun is enabled the main menu will pop up. ...

  17. questionM.U.G.E.N. - PC Guide
    M.U.G.E.N. is a 2D fighting game engine that is enables you to create commercial-quality fighting games. Almost everything can be customized, from individual characters to stages, as well as the look and feel of the game. Download M.U.G.E.N. Official M.U.G.E.N. Forum M.U.G.E.N. X-Arcade cont ...

  18. questionMac Is Freezing, or Running Slow With X-Arcade
    If your Mac is freezing or running very slowly you can disable the agent causing the problems following steps below: Click Mac HD System Library UserEventplugins Highlight the AppleHIDMouseAgent.plugin and delete Reboot your computer This will unload the HIDAgent hogging your resources. (Bug) ...

  19. questionHow can I extend the X-Arcade cables?
    BUTTONS/JOYS: The X-Arcade USB cable for the buttons/joys is very sensitive and cannot be extended with just a standard USB extension cable. Instead use an active USB Repeater Extension Cable. You can also extend the cable when using the PS/2 connection by getting either a longer serial cable, b ...

  20. questionHow do I use the X-Arcade™ on my laptop?
    It is usually best to simply use the USB connection for laptops. It is also important to make sure NUMLOCK is ON (otherwise Joy1 will act as arrow keys instead of NUMPAD numbers). To turn NumLock on with a laptop, usually you will find a blue colored "Fn" key that must be held while pressing an ...

(Page 2 of 2)     «« | Prev | 1 | 2 | Next | »»