|View Articles by Category
There are no sub categories
There were 27 articles found in this category:
(Page 1 of 2)
- MAME™ Alternatives - Play Arcade Classics - Arcade Center
Free Classic Games: We have also compiled the best free online playable and downloadable games with pages dedicated to each control type. The X-Arcade Tankstick™ can play all of them! X-Arcade™ Trackball Games Web Browser Classics Tons of arcade games are emaulated and playable righ ...
- How do I open the X-Arcade™?
The X-Arcade™ was made to be user serviceable, just like a real arcade. It does not void the Lifetime Warranty to open it. To open the X-Arcade™: First disconnect the X-Arcade™ from any systems, and remove the serial cable. Next turn the X-Arcade™ over on your ...
- How can I make the X-Arcade™ joystick more or less sensitive?
If a joystick is sticking in one direction, or you would like to make your joystick more sensitive to movements for a fighting game, adjusting the microswitch sensitivity is your answer. A good way to test if a microswitch direction is sticking because it needs adjusted is to open our X-Arcade ...
- How do I change the X-Arcade™ from 8-way to 4-way mode?
If you are playing a game like Pac-Man™ or Donkey Kong™ and find that the joystick gets stuck when changing directions, this is because these original arcade games used 4-way restricted joysticks, while the X-Arcade™ is set to 8-way mode by default. You can solve this with the ...
- X-Arcade™ Programming Guide
The X-Arcade™ was designed to be used with a variety of games and emulators, and will work with virtually any game or emulator on your PC in the default Mode1 without programming. Always try first to change the control settings in the emu/game rather than programming so you don't have to ...
- Marquees, Side Art, Overlays, etc.
X-Arcade Machine Custom Artwork Kit Here are the templates for side art and marquee for X-Arcade Machine 200MB EPS/PSD Files For X-Arcade Machine The X-Arcade Machine's marquee is approximately 24.75" x 7.25", but there is a wood frame around that size bringing the viewable size you actually see ...
- Use X-Arcade™ as a Windows Joystick/Gamepad Controller
Method 1: VJoy Virtual Joystick Driver can create virtual joysticks in Windows, and comes with a tool which allows you to map keystrokes to the virtual joysticks axes and buttons. Our custom ini will map the X-Arcade to the same buttons layout as a Xbox 360 controller in Windows. This means tha ...
- The trackball moves erratically, sticks, or does not work...what can I do? Opening & Cleaning the Trackball.
If your trackball is having connection issues or button issues, open the bottom of your controller and make sure none of the spare trackball cables are touching each other or anything else inside. You can tape them up if needed. Your X-Arcade™ Trackball may need to be opened and cleaned. ...
- How can I make the X-Arcade™ Trackball more or less sensitive on my PC?
Go to the "Mouse" section of your Control Panel in Windows™, under the "Pointer Options" tab adjust the "Select Pointer Speed" bar to faster for more sensitive movement, less for slower movement. This menu may be slightly different if you have 3rd party mouse software installed. Remember ...
- How do I use the X-Arcade™ with a USB or wireless keyboard?
USB Connection: The X-Arcade™ comes with both USB and PS/2 connection options, it is recommended to use the USB connection if you have a wireless or USB keyboard. Connected this way you do not need to have a keyboard plugged into the X-Arcade™ to use it. NOTE: You do need to have a ...
- How do I replace the PCB board and/or cable in the X-Arcade™?
Before you begin, first use the instructions here to open the X-Arcade™ controller. PCB and PCB-Cable replacement procedure: PCB-Cable replacement procedure: Open the X-Arcade. Remove the PCB-Cable's two white molex connectors from the PCB by simply pulling them off carefully. Pull th ...
- How do I replace a microswitch?
To replace a microswitch: Open the X-Arcade™ as instructed. PIC: Pull back the tallest plastic part holding the button in place. PIC: Lift the front part of the microswitch back. PIC: Remove the microswitch. PIC: To remove the the wires from the switch, use your fingers or pliers if n ...
- How can I use more than one X-Arcade™ (4-player) at a time on my PC?
You can plug in up to 2 X-Arcade™ dual controllers or 4 X-Arcade™ Solo 1-Player controllers on your PC or Mac.You can connect all of them into USB ports, or plug one X-Arcade™ into the PS/2 port and any others into USB ports. You cannot plug one X-Arcade™ into another. ...
- MAME™ Help
- Add Extra Key Functions to your X-Arcade on PC and for MAME, Including Macros
Add Extra Key Functions to your X-Arcade on PC and for MAME You can use AutoHotkey to not only software reprogram your X-Arcade keys on PC, but also to make macros (a set of keys that makes a sting of keys get pressed in order). If you want to add extra key functions to the X-Arcade on PC, downl ...
- How can I easily switch between 2 or more game consoles?
For the X-Arcade Controllers: You can purchase a DB9 Serial Switchbox and some extra serial cables to easily switch between one or more game consoles. Simply connect one serial cable between the IN port of the Switchbox and the X-Arcade™, and the other cables between the OUT ports and the ...
- M.U.G.E.N. - PC Guide
M.U.G.E.N. is a 2D fighting game engine that is enables you to create commercial-quality fighting games. Almost everything can be customized, from individual characters to stages, as well as the look and feel of the game. Download M.U.G.E.N. Official M.U.G.E.N. Forum M.U.G.E.N. X-Arcade cont ...
- Console Classix - Classic Console Gaming
Play thousands of classic console games on your PC! With Console Classix, you can enjoy the games of the past without the headache of hooking up classic console after classic console to your TV! This means thousands of classic, retro, and nostalgic games at your fingertips rather than wasting aw ...
- Connect A Coin Door for X-Arcade™
The X-Arcade™ Coin Door works with any X-Arcade product! Here is a guide for using any other coin door with the X-Arcade™
- USB PCB Upgrade Kit installation Guide
Before you begin, first use the instructions here to open the X-Arcade™ controller. Then check out our video for doing the upgrade: If you removed more than one jumper at once and aren't sure where to put them back, check out the schematic diagram below for proper placement: Click to Download
(Page 1 of 2)